UniFi
UISP
Branding
LTE Backup Pro
U-LTE-Backup Pro
| Mechanical | |
|---|---|
| Dimensions | 66 x 202 x 32 mm (2.6 x 8 x 1.3") |
| Weight | Without stand: 223 g (7.9 oz) With stand: 336 g (11.9 oz) |
| Enclosure material | Polycarbonate |
| Mount material | Stand: aluminium Wall mount: polycarbonate |
| Hardware | |
| Processor | 74 Kc MIPS processor at 775 MHz |
| Memory | 128 MB DDR2 |
| Networking interface | (2) GbE RJ45 ports LTE Category 4 radio |
| Management interface | Ethernet |
| PoE interface | (1) PoE in (PoE output not used) (1) PoE passthrough output (Requires a PoE+ switch) |
| SIM | nano-SIM* *Data-only. |
| LTE bands | Band 2, 4, 5, 12, 14, 66 |
| Operator | AT&T network* US only. |
| Power supply | UniFi PoE switch 48V, 0.5A PoE adapter |
| Supported voltage range | 44—57V DC |
| Max. power consumption | Excluding PoE passthrough output: 8.5W |
| Max. PoE passthrough wattage per port | 15.4W* *Requires a PoE+ switch |
| MIMO | 2 x 2 LTE Category 4 |
| Throughput speeds* | Download 150 Mbps / Upload 50 Mbps * Speed and coverage depend on location and network performance. |
| Antenna | (2) Internal LTE antennas (1) Female RP-SMA connector for an external antenna (optional)* *The maximum antenna gain must not exceed 6 dBi to comply with regulation. |
| External antenna port* | Female RP-SMA connector *Please use male RP-SMA antennas to match the U LTE Backup Pro. |
| LCM display | 1.54" screen |
| Button | Factory reset |
| Mounting | Wall mount or foot stand (Included) |
| Ambient operating temperature | -10 to 60° C (-14 to 140° F) |
| Ambient operating humidity | 5 to 95% noncondensing |
| Certifications | FCC, IC |
| Software | |
| Management application | UniFi Network: Version 7.2.85 and later |