94.9 x 40 x 31.1 mm (3.7 x 1.6 x 1.2")

✓

✓

✓

✓

Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I

67 g (2.4 oz)

Polycarbonate

Yes

-20 to 40° C (-4 to 104° F)

5 to 90% noncondensing

(1) 10/100 MbE port

BLE 4.1 Ethernet

PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU

6W

44—57V DC

B/W Learn More

(1) Factory-reset

13.56 MHz

< 30 mm (1.18'')

ISO 14443A, 14443B, 15693 NFC Tag 1, 2, 3, 4, 5 MIFARE Classic MIFARE Plus MIFARE Ultralight MIFARE DESFire

Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.

Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

Grade assignment: I

CE, FCC, IC, UL 294, CAN/ULC-60839-11-1

Access