Cloud Gateways
Switching
WiFi
Camera Security
Door Access
Integrations
Accessory Tech
Identity
Support
Store
UniFi
UISP
Branding
UniFi Cloud Gateways
Switching
WiFi
Camera Security
Door Access
CloudKeys & Gateways
Power Tech
Integrations
Accessories
Hubs
Gate Hub
Gate Hub
Gate Hub

UA-Hub-Gate

Datasheet
In The Box
Marketing Images
Installation Guide
Gate Hub
Gate Hub
Gate Hub
Mechanical
Dimensions175 x 126 x 26 mm (6.9 x 5 x 1")
Weight460 g (1 lb)
Enclosure materialPolycarbonate
MountingDin-rail (Included)
Hardware
Networking interface(5) 10/100/1000 Base-T
Power methodPoE++
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Max. power consumptionWithout PoE output: 22W
With PoE output: 50W
PoE input50V DC, 1A
PoE outputPoE passthrough, (4) PoE, 50V DC, Max. 28W
LEDsWhite/blue (Learn more)
Button(1) Factory-reset
Digital inputGate exit request, gate position, side door exit request, side door position, emergency
Dry output relay(2) Operator: rated 30V DC, up to 1A
(1) Aux: rated 30V DC, up to 1A
Output relaySide door lock: 12V DC, up to 1A
Recommend max. cable length
18 AWG
UACC-Cable-DoorLockRelay length		20
AWG length		22
AWG length		24
AWG length
UA-Lock-Electric
(400mA)		100 m
(328 ft)		66 m
(217 ft)		42 m
(138 ft)		25 m
(82 ft)
UA-Lock-Magnetic-270kg
(800mA)		46 m
(151 ft)		30 m
(98 ft)		20 m
(66 ft)		12 m
(29 ft)
UA-Lock-Magnetic-540kg
(500mA)		80 m
(262 ft)		51 m
(167 ft)		32 m
(105 ft)		20 m
(66 ft)
Other locks
(1A)		36 m
(118 ft)		24 m
(79 ft)		15 m
(49 ft)		9 m
(30 ft)
PoE cabling requirementsCable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
Operating environmentIndoor use only with device itself
Outdoor use with waterproof junction box
Ambient operating temperature-30 to 60° C (-22 to 104° F)
Ambient operating humidity5 to 90% noncondensing
Software informationThe software version of a product can be checked at https://unifi.ui.com
UL 294 levelDestructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
UL 294 statementCompliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE cabling requirementsCable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
CAN/ULC-60839-11-1 GradeGrade assignment: I
CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision levelUA-Hub-Gate, V01