UniFi
UISP
Branding
Fiber XG
Fiber XG

UISP-FIBER-XG

Datasheet
Marketing Images
Installation Guide
Fiber XG
Mechanical
Dimensions100 x 100 x 27 mm (3.9 x 3.9 x 1.1")
Weight220 g (0.49 lb)
Enclosure materialUV-stabilized polycarbonate
Hardware
Networking interface(1) SC/APC, ITU-G.987 XGPON WAN port
(1) 100/1,000/2,500 MbE RJ45 LAN ports
Management interfaceEthernet in-band
PON
PoE interface(1) PoE in, 24V DC passive PoE
Memory256 MB DDR
Onboard flash storage32 MB NOR
Max. power consumption6W
Power methodUSB-C 5V DC, 3A
24V DC passive PoE
Power supply5V DC, 3A power adapter
Passive PoE 2-pair (4, 5+; 7, 8-)
Supported voltage range5V DC adapter
10–30V DC passive PoE
Total non-blocking line rateDownstream: 9.95 Gbit/s
Upstream: 2.44 Gbit/s
Normal TX range of optical module2 to 7dBm
Normal RX range of optical module-9 to -27dBm
Button(1) Factory reset
Ambient operating temperature-15 to 45° C (5 to 113° F)
Ambient operating humidity10 to 95% non-condensing
CertificationsCE, FCC, IC
Fiber
Operating wavelengthTX: 1,270nm
RX: 1,577nm
Line codeScrambled NRZ
Physical reach20 km
LEDs
PowerWhite: ON
EthernetSteady white: link up
Blinking white: activity
OFF: link down
PON status(3) signal LEDs
All-OFF: bootup
1x orange: signal too low (< -27 dbm)
1x white: signal low (>= -27 dbm)
2x white: signal good (>= -24 dbm)
3x white: signal strong (>= -12 dbm)
1x orange + 2x white: signal too strong (>= -9 dbm)
3x orange: no signal
LEDs alternate between orange + white + orange and a signal strength indicator: no authority
Compliance Information